MOYCO INDUSTRIES INC -- CASTING WAX  -- 9160-00F041346
<pre>=====================  Product Identification  =====================

Product ID:CASTING WAX
MSDS Date:01/01/1995
FSC:9160
NIIN:00F041346
=== Responsible Party ===
Company Name:MOYCO INDUSTRIES INC
Address:21ST & CLEARFIELD ST
City:PHILADELPHIA
State:PA
ZIP:19132-1517
Country:US
Info Phone Num:215-229-0470/800-523-3676
Emergency Phone Num:215-229-0470/800-523-3676
CAGE:41946
=== Contractor Identification ===
Company Name:MOYCO INDUSTRIES INC
Address:2054 W CLEARFIELD ST
Box:City:PHILADELPHIA
State:PA
ZIP:19132-1517
Country:US
Phone:215-229-0470; 800-523-3676
CAGE:41946

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SLIGHT IRRITATION OF EYES & MILD UPPER
    RESPIRATORY IRRITATION IF EXPOSED TO FUMES. MOLTEN MATERIAL BURNS
    SKIN ON CONTACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SLIGHT IRRITATION OF EYES & MILD UPPER
    RESPIRATORY IRRITATION IF EXPOSED TO FUMES. MOLTEN MATERIAL BURNS
    SKIN ON CONTACT.

=======================  First Aid Measures  =======================

First Aid:SKIN: IF HOT WAX STRIKES SKIN, DRENCH/IMMERSE AREA IN WATER
    TO ASSIST COOLING. APPLY ICED WATER/ICE PACKS TO BURNED AREA. DON'T
    TRY TO REMOVE WAX FROM A BURN AFTER IT HAS COOLED. INHALATION:
    REMOVE TO  FRESH AIR. EYES: FLUSH W/COPIOUS AMOUNTS OF WATER.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, DRY CHEMICAL, CO2. DON'T USE DIRECT STREAM OF
    WATER.
Fire Fighting Procedures:DON'T ENTER FIRE-SPACE W/OUT FULL BUNKER-GEAR
    W/A POSITIVE PRESSURE NIOSH APPROVED SELF CONTAINED BREATHING
    APPARATUS. COOL AREA W/WATER FOG.
Unusual Fire/Explosion Hazard:DENSE SMOKE & PRODUCTS OF COMBUSTION MAY
    BE GENERATED WHILE BURNING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
    CAUTIONS JUDGEMENT WHEN CLEANING UP A LARGE MOLTEN SPILL. SMALL:
    ALLOW WAX TO COOL & REMOVE AS A SOLID.

======================	Handling and Storage  ======================

Other Precautions:MINIMIZE BREATHING VAPORS, FUMES/MIST. AVOID CONTACT
    W/MOLTEN MATERIAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE AT AMBIENT CONDITIONS; OTHERWISE USE A
    NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL IS SUFFICIENT
Protective Gloves:REQUIRED WHILE HANDLING LIQUID
Eye Protection:SPLASH SHIELD/GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>600F
Melt/Freeze Pt:M.P/F.P Text:155F
Vapor Pres:<0.1
Spec Gravity:0.93
Evaporation Rate &amp; Reference:(BU AC=1): <0.01
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE/GREEN WAXY SOLID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE IN APPROPRIATE DISPOSAL FACILITY IN
    ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.