GOLD EAGLE CO. -- (PL8) 12/8 OZ. POWER STEERING FLUID  -- 9150-00B070063
<pre>=====================  Product Identification  =====================

Product ID:(PL8) 12/8 OZ. POWER STEERING FLUID
MSDS Date:07/11/1990
FSC:9150
NIIN:00B070063
=== Responsible Party ===
Company Name:GOLD EAGLE CO.
Address:4400 S. KILDARE BLVD.
City:CHICAGO
State:IL
ZIP:60632-4372
Country:US
Info Phone Num:312-376-4400
Emergency Phone Num:800-535-5053 (INFOTRAC)
CAGE:DO861
=== Contractor Identification ===
Company Name:GOLD EAGLE CO.
Address:4400 S. KILDARE
City:CHICAGO
State:IL
ZIP:60632
Country:US
Phone:1-312-376-4400
CAGE:DO861
Company Name:GOLD EAGLE COMPANY
Address:4400 S KILDARE BLVD.
Box:97267
City:CHICAGO
State:IL
ZIP:60632-4372
Country:US
Phone:773-376-4400
CAGE:2M612

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM OIL
CAS:64742-65-0
Fraction by Wt: 95-100%
Other REC Limits:NONE SPECIFIED

Ingred Name:ANTIWEAR RUST & OXIDATION INHIBITOR
Fraction by Wt: 0-5%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: LOW RISK OF INHALATION AT
    AMBIENT TEMP. MISTS/FUMES MAY CAUSE DROWSINESS, NAUSEA, HEADACHE,
    LUNG IRRITATION OR CHEMICAL PNEUMONITIS. SLIGHT SKIN & EYE
    IRRITANT. LOW TOXICITY, IF INGESTED, MAY P ASS THROUGH SYSTEM
    WITHOUT HARM. CHRONIC: FREQUENT/ PROLONGED EXPOSURE MAY CAUSE SKIN
    DRYING, CRACKING OR FOLLICULITIS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE VICTIM TO FRESH AIR, RESTORE/SUPPORT
    BREATHING AS REQUIRED. SEEK PROMPT MEDICAL TREATMENT. SKIN: WASH
    WITH SOAP AND WATER. IF SKIN IRRITATION PERSISTS, SEEK MEDICAL
    ATTENTION. EYES:  FLUSH WITH WATER FOR 15 MIN., SEEK MEDICAL
    ATTENTION. INGESTION: DO NOT INDUCE VOMITTING. SEEK MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:392F,200C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL, TRANSFER TO SECURE CONTAINERS.
    IN THE EVENT OF AN UNCONTROLLED MATERIAL RELEASE, THE USER SHOULD
    DETERMINE IF RELEASE IS REPORTABLE UNDER APPLICABLE LAWS AND
    REGULATIONS. ABSORB SMALL S PILLS WITH SUITABLE MATERIAL (OIL DRY,
    SAND, ETC.)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 150F, KEEP AWAY FROM HIGH
    HEAT OR FLAME. KEEP SEPARATE FROM STRONG OXIDIZING AGENTS.
Other Precautions:EMPTY CONTAINERS MAY INCLUDE PRODUCT RESIDUE WHICH
    COULD INCLUDE FLAMMABLE OR EXPLOSIVE VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IN AREAS
    EXCEEDING TLV.
Ventilation:PROVIDE PROPERLY ENGINEERED VENTILATION TO MAINTAIN OIL
    MIST LEVELS BELOW OSHA/PEL/TLV/TWA OF 5 MG/CUBIC METER.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GOGGLES IF SPLASHING ANTICIPATED.
Other Protective Equipment:PROTECTIVE CLOTHING, IF REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:665F,352C
Vapor Density:>1.0
Spec Gravity:0.872
Evaporation Rate &amp; Reference:<1.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER, OILY LIQUID. NO ODOR SPECIFIED BY
    MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO2, TRACES S, P, ZN, CA, MG

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS. BEFORE ATTEMPTING CLEAN UP, REFER TO
    OTHER SECTIONS OF MSDS FOR HAZARD CAUTION INFORMATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.