DU PONT E I DE NEMOURS & CO INC AUTOMOTIVE PRODS D -- 8022S ENAMEL REDUCERS -- 8010-00F003502
=====================  Product Identification  =====================

Product ID:8022S ENAMEL REDUCERS
MSDS Date:01/01/1995
FSC:8010
NIIN:00F003502
=== Responsible Party ===
Company Name:DU PONT E I DE NEMOURS & CO INC AUTOMOTIVE PRODS D
Address:BRANDYWINE BLDG 3332 1007 MARKET ST
City:WILMINGTON
State:DE
ZIP:19898-5000
Country:US
Info Phone Num:800-441-7515/302-2774-9395
Emergency Phone Num:800-441-3637/800-441-7515
Preparer's Name:T R LOUER
CAGE:90227
=== Contractor Identification ===
Company Name:DU PONT E I DE NEMOURS & CO FABRICATED PROD DEPT
Address:1007 MARKET ST BRANDYWINE BLDG 3332
Box:City:WILMINGTON
State:DE
ZIP:19898
Country:US
Phone:800-441-3637
CAGE:90227

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 8%
OSHA PEL:2400 MG/CUM
ACGIH TLV:750 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM  *95-4*
CAS:64742-94-5
RTECS #:WF3100000

Ingred Name:BUTYL ACETATE (N-BUTYL ACETATE)   *95-4*
CAS:123-86-4
RTECS #:AF7350000
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL
    ETHER (BUTYL CARBITOL)
CAS:112-34-5
RTECS #:KJ9100000
Fraction by Wt: 2%

Ingred Name:DIISOBUTYL KETONE
CAS:108-83-8
RTECS #:MJ5775000
Fraction by Wt: 4%
Other REC Limits:25 PPM
OSHA PEL:50 PPM
ACGIH TLV:145 MG/CUM

Ingred Name:ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE
    ACETATE, 2-BUTOXYETHYL ACETATE * 95-3 *
CAS:112-07-2
RTECS #:KJ8925000
OSHA PEL:50 PPM
ACGIH TLV:25 PPM

Ingred Name:PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
    1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000

Ingred Name:TOLUENE (IARC CARC- GROUP 3)     *95-4*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 4%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS:64742-89-8
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION.
    REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT
    BRAIN & NERVOUS SYSTEM DAMAGE. SKIN: IRRITATION W/DERMATITIS. EYES:
    IRRITATION & BURNING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:GI DISTRESS, IRRITATION, BURNING, DISCOMFORT.
    EYE WATERING, HEADACHES, NAUSEA, DIZZINESS & LOSS OF COORDINATION
    ARE SIGNS THAT SOLVENTS ARE TOO HIGH.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER.
    EYES: WASH W/PLENTY OF WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION
    IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:<20F
Lower Limits:0.6
Upper Limits:13.1
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT W/SCBA. WATER
    FROM FOG NOZZLES MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT
    PRESSURE BUILD UP.
Unusual Fire/Explosion Hazard:WHEN HEATED >FLASH POINT, EMITS FLAMMABLE
    VAPORS WHICH, WHEN MIXED W/AIR, CAN BURN/BE EXPLOSIVE. FINE
    MISTS/SPRAYS MAY BE FLAMMABLE AT TEMP 120F.
Other Precautions:DON'T SAND, FLAME CUT, BRAZE/WELD DRY COATING W/OUT A
    NIOSH/MSHA APPROVED RESPIRATOR/APPROPRIATE VENTILATION. DON'T
    BREATHE VAPORS/MISTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A PROPERLY FITTED VAPOR/PARTICULATE
    RESPIRATOR APPROVED BY NIOSH/MSHA FOR USE W/PAINTS DURING
    APPLICATION. CONFINED AREAS: USE POSITIVE PRESSURE, SUPPLIED AIR
    RESPIRATOR. DON'T PERMIT ANYONE W/O  PROTECTION IN PAINTING AREA.
Ventilation:PROVIDE SUFFICIENT VENTILATION IN VOLUME & PATTERN TO KEEP
    CONTAMINANTS BELOW APPLICABLE OSHA REQUIREMENTS.
Protective Gloves:NEOPRENE
Eye Protection:SPLASH GUARDS/SIDE SHIELDS
Other Protective Equipment:NEOPRENE COVERALLS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE
    EATING/SMOKING.
Supplemental Safety and Health
%VOLATILE BY VOLUME: 99.6-100.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:129-473F
Vapor Density:>1
VOC Grams/Liter:6.5
Evaporation Rate & Reference:LESS THAN ETHER
Solubility in Water:MISCIBLE
Percent Volatiles by Volume:(SUPP)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:CO, CO2, SMOKE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
    SYSTEMS. INCINERATE ABSORBED MATERIAL IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. DON'T INCINERATE IN CLOSED CONTAINERS. FLAMMABLE
    LIQUID UN1263.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.