VALVOLINE CO -- NAPA HD MOTOR OIL SAE 30W -- 9150-00N073633
===================== Product Identification ===================== Product ID:NAPA HD MOTOR OIL SAE 30W MSDS Date:02/28/1995 FSC:9150 NIIN:00N073633 === Responsible Party === Company Name:VALVOLINE CO Box:14000 City:LEXINGTON State:KY ZIP:40512 Country:US Info Phone Num:606-357-7847 Emergency Phone Num:800-274-5263 CAGE:IO754 === Contractor Identification === Company Name:THE VALVOLINE CO Box:14000 City:LEXINGTON State:KY ZIP:40512 Country:US Phone:606-357-7847 CAGE:IO754 Company Name:VALVOLINE OIL CO Address:3499 BLAZER PKY Box:14000 City:LEXINGTON State:KY ZIP:40512 Country:US Phone:606-357-7206 / 800-274-5263 CAGE:72527 ============= Composition/Information on Ingredients ============= Ingred Name:MINERAL OIL, PETRO DISTILS, SOLV-DEWAXED HEAVY PARAFFINIC (SEV SOLV-REFINING &/HYDROTREATMENT);(ALIPHATIC PETRO DISTILS) CAS:64742-65-0 RTECS #:PY8038501 Fraction by Wt: 84-94% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:DETERGENT/DISPERSANT ENGINE OIL PACKAGE Fraction by Wt: 6-16% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:PHOSPHORODITHOIC ACID, O-O-D1 C1-14-ALKYL ESTERS, ZINC SALTS (2:1) (ZDDP); (ZINC COMPOUNDS) CAS:68649-42-3 Fraction by Wt: 1.1% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:SPILL PROC: SHOULD BE EXCLUDED FROM AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED. STOP SPILL AT SOURCE, DIKE (ING 5) RTECS #:9999999ZZ Ingred Name:ING 4: AREA OF SPILL TO PVNT SPREADING, PUMP LIQ INTO SALVAGE TANK. REMAINING LIQ MAY BE TAKEN UP ON SAND, CLAY, (ING 6) RTECS #:9999999ZZ Ingred Name:ING 5: EARTH, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL AND SHOVELED INTO CONTAINERS. RTECS #:9999999ZZ Ingred Name:VENT: MECHANICAL (GENERAL AND/OR LOCAL EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW PEL/TLV(S). RTECS #:9999999ZZ Ingred Name:SUP DAT: USED MOTOR OIL HAS BEEN SHOWN TO CAUSE SKIN CANCER IN LAB ANIMALS CONTINUALLY EXPOSED BY REPEATED (ING 9) RTECS #:9999999ZZ Ingred Name:ING 8: APPLICATIONS. AVOID PROLONGED OR REPEATED SKIN CONTACT. RTECS #:9999999ZZ ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: EYE: EXPOS MAY CAUSE MILD EYE IRRIT. SYMPS MAY INCL STINGING, TEARING, & REDNESS. SKIN: EXPOS MAY CAUSE MILD IRRIT. PRLNG/RPTD EXPOS MAY DRY SKIN. SYMPS MAY INCL REDNESS, BURNING, DRYING & CRAC KING, & SKIN BURNS. INGEST: SINGLE DOSEORAL TOX IS LOW. SWALLOWING SML AMTS DURING NORM HNDLG IS NOT (SUP DAT) Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:HLTH HAZ: LIKELY TO CAUSE HARMFUL EFTS. SWALLOWING LGE AMTS MAY BE HARMFUL. INHAL: EXPOS IS POSS UNDER CERTAIN CNDTNS OF HNDLG & USE (FOR EXAMPLE, DURING HEATING, SPRAYING/STIRRING). SYMPS ARE MORE TY PICALLY SEEN AT AIR CONCS EXCEEDING RECEXPOS LIM. SYMPS OF EXPOS: GI IRRIT (NAUS, VOMIT, DIARR), IRRIT (NOSE, (SUP DAT) Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS MATERIAL. PREEXISTING LUNG DISORDERS (E.G., ASTHMA-LIKE CONDITIONS), MAY BE AGGRAVATED BY EXPOSURE TO THIS MATERIAL. ======================= First Aid Measures ======================= First Aid:EYES:IF SYMPS DEVELOP, MOVE INDIVIDUAL AWAY FROM EXPOS & INTO FRESH AIR. FLUSH EYES GENTLY W/WATER FOR AT LEAST 15 MIN, WHILE HOLDING EYELIDS APART. IF SYMPS PERSIST/THERE IS ANY VISUAL DFCLTY, SEEK M ED ATTN. SKIN:REMOVE CONTAM CLTHG. WASHEXPOSED AREA W/SOAP & WATER. IF SYMPS PERSIST, SEEK MED ATTN. LAUNDER CLTHG BEFORE REUSE. INGEST:DO NOT INDUCE VOMIT. GIVE 1 GLASS OF MILK/WATER, & GET(SUP DAT) ===================== Fire Fighting Measures ===================== Flash Point:430F,221C Extinguishing Media:REGULAR FOAM, CARBON DIOXIDE, DRY CHEMICAL. Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP . WATER OR FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT & POSSIBLY ENDANGER THE LIFE OF THE FIREFIGHTER. Unusual Fire/Explosion Hazard:NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM (EVEN EMPTY) BECAUSE PROD (EVEN JUST RESIDUE) CAN IGNITE EXPLOSIVELY. DENSE SMOKE MAY BE GENERATED WHILE BURNING. ================== Accidental Release Measures ================== Spill Release Procedures:SML SPILL: ABSORB LIQ ON VERMICULITE, FLOOR ABSORB/OTHER ABSORB MATL. LGE SPILL: PVNT RUN-OFF TO SEWERS, STREAMS/OTHER BODIES OF WATER. IF RUN-OFF OCCURS, NOTIFY PROPER AUTH AS REQUIRED, THAT A SPILLL HAS OCCURRED. PERS NOT WEARING PROT EQUIP (ING 4) Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:CONTRS OF THIS MATL MAY BE HAZ WHEN EMPTIED. SINCE EMPTIED CONTRS RETAIN PROD RESIDUES (VAP, LIQ, AND/SOLID), ALL HAZ PREC IN MSDS MUST BE OBSERVED. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED UNDER NORMAL CNDTNS OF USE. HOWEVER, IF OIL MISTS ARE GENERATED ABOVE RECOMMENDED PEL/TLV OF 5 MG/M3, THEN A NIOSH APPRVD RESP IS ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL (CONSU LT YOUR INDUSTRIAL HYGIENIST). Ventilation:NOT REQUIRED UNDER NOR CNDTNS OF USE. HOWEVER, IF UNUSUAL OPERATING CNDTNS EXIST, THEN PROVIDE SUFFICIENT (ING 7) Protective Gloves:NITRILE RUBBER GLOVES. Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN CRITERIA . WEAR NORMAL WORK CLTHG COVERING ARMS & LEGS. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health FIRST AID PROC: MED ATTN IMMED. IF POSS, DO NOT LEAVE VICTIM UNATTENDED. INHAL:IF SYMPS DEVELOP, IMMED MOVE INDIVIDUAL AWAY FROM EXPOS & INTO FRESH AIR. SEEK IMMED MED ATTN; KEEP PERS WARM & QUIET. IF PERS IS NOT BRTHG, BEGIN ARTF RESP. IFBRTHG IS DFCLT, ADMIN OXYGEN. EFTS OF OVEREXP: THROAT, RESP TRACT), (ING 8) ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>425F,>218C Spec Gravity:0.891 Appearance and Odor:DRY, CLEAR AND BRIGHT LIQUID ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID CONTACT WITH STRONG OXIDIZING AGENTS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:MAY FORM CARBON DIOXIDE AND CARBON MONOXIDE, OXIDES OF SULFUR, NITROGEN AND PHOSPHORUS, VARIOUS HYDROCARBONS. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.