NEWFOUNDLAND DOCKYAARD CORP -- KEROSENE -- 9140-01-292-4460
===================== Product Identification ===================== Product ID:KEROSENE MSDS Date:08/10/1989 FSC:9140 NIIN:01-292-4460 === Responsible Party === Company Name:NEWFOUNDLAND DOCKYAARD CORP Address:JOBS BRIDGE CROSSING Box:97 City:ST JOHNS NEW FOUNDLAND CANADA Country:CA Info Phone Num:709-463-8811 Emergency Phone Num:709-463-8811 CAGE:0M8E5 === Contractor Identification === Company Name:NEWFOUNDLAND DOCKYAARD CORP Address:JOBS BRIDGE CROSSING Box:97 City:ST JOHNS NEW FOUNDLAND CANADA Country:CA Phone:709-463-8811 CAGE:0M8E5 ============= Composition/Information on Ingredients ============= Ingred Name:KEROSENE CAS:8008-20-6 RTECS #:OA5500000 Fraction by Wt: 100% % Other REC Limits:NONE SPECIFIED OSHA PEL:100 PPM ACGIH TLV:100 PPM 9091 ===================== Hazards Identification ===================== LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYE IRRITATION, RESPIRATORY TRACT IRRITATION, CENTRAL NERVOUS SYSTEM EFFECTS,SKIN IRRITATION/RASH, GASTROINTESTINAL DISTURBANCES, ASPIRATION HAZARD Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA PER MANUFACTURER. Effects of Overexposure:EYES/NOSE/THROAT IRRITATION, HEADACHES, DIZZINESS, SKIN RASH, NAUSEA, VOMITING, DIARRHEA, RESTLESSNESS, CHEMICAL PNEUMONIA. Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND/OR REPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. ADMINISTER ARTIFICIAL RESPIRATION OR CPR. GET MEDICAL ATTENTION. EYES: FLUSH CONTINUOUSLY WITH WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN: FLUSH WITH LARGE AMOUNTS OF WATER. USE SOAP IF AVAILABLE. REMOVE CONTAMINATED CLOTHING. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:100F,38C Lower Limits:0.7 % Upper Limits:5 % Extinguishing Media:FOAM, DRY CHEMICAL OR WATER SPRAY. AVOID SPRAYING DIRECTLY INTO FIRE. Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES AND TO PROTECT PERSONNEL. SHUT OFF FUEL TO FIRE IF POSSIBLE. WEAR SELF-CONTAINED BREATHING APPARATUS. Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL TO REMOTE IGNITION SOURCES AND IGNITE. ================== Accidental Release Measures ================== Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. KEEP PUBLIC AWAY. PREVENT ACCIDENTAL DISCAHRGE INTO SEWERS, WATERCOURSES OR LOW AREAS. CONTAIN SOILED LIQUID WITH EARTH OR SAND. RECOVER BY PUMPING OR USE ON NONCOMBUSTI BLE ABSORBENT. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP CONTAINERS CLOSED AND AWAY FROM IGNITION SOURCES AND HEAT. HANDLE AND OPEN CONTAINERS WITH CARE. STORE IN A COOL, WELL-VENTILATED AREA. Other Precautions:MATERIAAL WILL ACCUMULATE STATIC CHARGES WHICH MYA BECOME A SOURCE OF IGNITION. USE PROPER GROUNDING PROCEDURES. FOLLOW PROPER SWITCH LOADING PROCEDURES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WHEN CONCENTRATIONS MAY EXCEED THE PEL/TLV'S AND WHERE ENGINEERING WORK PRATICES OR OTHER MEANS OF EXPOSURE REDUCTION ARE NOT ADEQUATE, APPROVED RESPIRATORS MAY BE NECESSARY TO PREVENT OVEREXPOSURE BY INHALATION. Ventilation:LOCAL EXHAUST VENTILATION IS RECOMMENDED. LAB SAMPLES SHOULD BE HANDLED IN A FUME HOOD. Protective Gloves:CHEMICAL RESISTANT GLOVES Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS Other Protective Equipment:LONG SLEEVED SHIRTS, EMERGENCY EYEWASH STATION AND SHOWER. Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT AND BEFORE EATING DRINKING OR SMOKING. Supplemental Safety and Health MAY FORM COMBUSTIBLE MIXTURES AT OR ABOVE THE FLASHPOINT. FLAMMABLE GASES WILL FORM AT ELEVATED TEMPERATURES. TOXIC GASES WILL FORM UPON COMBUSTION. MATERIAL MAY ACCUMULATE STATIC CHARGES WHICH MAY DI SCHARGE AND CAUSE IGNITION. EMPTY PRODUCT CONTAINERS MAY CONTAIN PRODUCT RESIDUE. DO NOT PRESSURIZE, CUT, HEAT OR WELD. ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:130F - 300C Melt/Freeze Pt:M.P/F.P Text:-40F,-40C Vapor Pres:5 KPA @38C Vapor Density:4.5 Spec Gravity:0.80-0.85@15C Evaporation Rate & Reference:NOT GIVEN Solubility in Water:INSOLUBLE Appearance and Odor:CLEAR, COLORLESS OR PALE YELLOW LIQUID PETROLEUM ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS SUCH AS OXYGEN, CHLORINE, BROMINE Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, HOT SURFACES Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, CARBON DIOXIDE, SULPHUR OXIDES ==================== Disposal Considerations ==================== Waste Disposal Methods:ENSURE DISPOSAL IN COMPLIANCE WITH GOVERNMENT REGULATIONS AND LOCAL DISPOSAL REGULATIONS. NOTIFY AUTHORITIES IMMEDIATELY. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.